What barrel threads does it use?
Autococker threaded barrels
What type of tank should be used?
An HP tank is reccomended for the Wrath, though an LP tank will work.
What is the stock barrels bore size?
.693 bore
What is its weight?
2 lbs 11.8 oz without the barrel
Can I add a drop?
If you want to add a drop forward, you'll need to buy a drop, an on/off ASA and a macroline kit.
What type of feednecks fit?
Odyssey, Dragun, Wrath LTD, and modified Spyder feednecks will fit.
What are the dimensions?
Wrath height (bottom of grip frame to top of feedneck) -8 inches
Length from back of ram cap to front of barrel opening - 7 7/8 inches
Length from back of ram cap to front of LPR - 10 13/16 inches
Body width (measured at widest point) - 15/16 inch
Grip frame width with grip on - 1 3/8 inches
Grip frame width w/o grip on - 3/4 inch
What type of LP hose does it use?
3 / 32" hose
Part # 5648K23 at www.mcmaster.com
How do I adjust the velocity?
Set the HPR to 250 psi. Turn the LPR nut in 1/2 turn and shoot over a chrono. Repeat until the FPS is near what is desired. Turn the LPR nut slightly in to raise FPS or out to lower FPS.
What type of LP hose fitting does it use ?
Glass-Filled Nylon Instant Tube Fitting Swvl 90 Deg Elbow, Tube X Male, 5/32" Tube, 10-32 Unf
Part # 5779K284 at www.mcmaster.com